Why build pools moving into the fall?

Autumn Pool Care

We are starting to get alot of questions regarding existing pools and what is typically done for "winterizing" ?? Winterizing a swimming pool means to simply pull all the drain plugs on the equipment, and then to lower the water to the bottom of the tile. Swimming pools that are winterized in this manner do not typically have the plumbing lines blown out, nor do they have any anti-freeze added to the lines. Most pools have any type of cover installed over them (although some do). We do not typically winterize any of our pool builds, but this seems to be a more pressing question with all of the hard freezes we have experienced in the past few years We recommend to follow these precautions for all of our clients and for those choosing not to Winterize a swimming pool in Texas. 1.) Make sure you have a freeze guard or freeze switch installed . What is this? Do i have one? This is simply a thermostat with a switch that will override the pool pump timer and turn it on when the air temperature gets down to a certain degrees. Most pools built within the past few years have these built in. All of our clients are built with the latest technology and our pool panels and are fully equipped! What is most important is to set your freeze switch to turn on the equipment a few degrees higher than 32 degrees F. This is because freeze switches or guards are normally only accurate to within 3-5 degrees of the actual temperature. Also note that it can save you money on electricity if you set your equipment to run at night during the Winter instead of the day. This is because it will run at night anyway on cold nights, causing you to have less total run time. 2.) Make sure any automated valves are working properly . Some control centers with automated valves will "cycle" the water by diverting it through different devices or the spa as a part of the freeze switch cycle.  3.) Check your heater to make sure it fires up without any issues . Remove any debris such as leaves or twigs from the top or surrounding areas of the heater to help prevent any risks of fire. If you or anyone has questions moving into these winter months, don't hesitate to give us a call or check out our website @ https://www.stallionpoolsandlandscape.com/

The cost of building a pool varies on several factors, including the type of pool, size, location, materials, water features, and labor and construction costs. According to many reports, over 60% of new swimming pools are gunite while fiberglass and vinyl are below 15% and 30%. Stallion Pools and Landscape only builds inground pools in the Greater North Austin areas. Below is a break down of pool types. Inground Pools (average base price - $75,000): These cost more because they are built with higher quality construction materials which makes for a more durable long term project. They are also flexible on designs because of all the options are "custom" and readily available. Cost can range from $75,000 or more, depending on a multitude of factors including the size, shape, and materials/features. Concrete pools add by far the most value to a homes resale far above other types of pools. Fiberglass Pools (average base price - $50,000): These pools are pre made and are installed in the ground. They can cost $50,000 or more, depending on size, materials, and features. They come in very limited shapes, which eliminate the ability to customize them to your preferences. These pools are far less durable long term compared to a gunite/inground pool. Vinyl Liner Pools (average base price - $40,000): Constructed with a vinyl liner over a frame, the upfront affordability may be attractive, but take into consideration the potential ongoing costs down the road. For example, it's possible the liner may need replacement every 5-10 years. This adds to long-term costs. They are also susceptible to tearing, staining, and to algae growth We would like to note, that these are estimates and actual cost can vary significantly up or down. Another big consideration is the warranty offered by installers of these various pool types. Additional cost factors include: Pool Size: Larger pools will cost more than smaller pools due to the increase in construction materials. Pool Features: Water features like waterfalls, slides, bubblers, lighting, heating systems, and automation will absolutely increase the cost. Site Preparation: access and slope to the site as well as rock, soil and major grading can impact the cost. Location: Local building codes, permits, and labor costs widely from one city to another. Landscaping: The area around the pool might need landscaping, which can add to the overall cost. Find a builder that can offer you a turnkey project. Business Rating: The pool builder's reputation and experience can vastly vary the cost. Cheaper options are not the best quality. Check for signs of wall thickness, steel thickness and spacing, engineering, and lastly ratings on google. Make sure to the company is rated high with descriptive reviews to protect yourself on your investment.  When getting an estimate for building your pool, try to contact reputable local pool contractors for quotes. If you are planning to install a concrete pool, feel free to check us out on our website listed below. We've built 100's of beautiful pools and make a point to stand out with our second to none communication and attention to detail. https://www.stallionpoolsandlandscape.com/

The new season is a great reason to make and keep resolutions. Whether it’s eating right or cleaning out the garage, here are some tips for making and keeping resolutions.

There are so many good reasons to communicate with site visitors. Tell them about sales and new products or update them with tips and information.

Write about something you know. If you don’t know much about a specific topic that will interest your readers, invite an expert to write about it.